Welcome to AMIE Study - AMIE India Students Forum

AMIE Study - AMIE India Students Forum

collapse collapse

* Shoutbox

Refresh History
  • vae: hi
    May 19, 2019, 03:21:54 PM
  • raviteja2412: I need mining engineering previous years question paper can anyone help me
    May 13, 2019, 06:20:39 PM
  • vae: Good afternoon every1
    May 09, 2019, 01:14:34 PM
  • vae: IMNA : EXCELLENT TUITIONS  136, First Floor, Above Raghavendra Enterprises, Coconut Avenue, 8th Cross, Malleswaram, Bangalore 560 003, India.  Phone: +91 9844027371
    May 02, 2019, 05:13:30 PM
  • vae: hellooooooooooooooooooooo
    May 02, 2019, 12:36:53 PM
  • vae: Shantanu09 - You can get the full notes if  U follow the link : [link]
    May 01, 2019, 12:44:07 PM
  • vae: Dear Shahul, kindly follow the link : [link] where you can get all details
    May 01, 2019, 12:42:37 PM
  • shantanu09: HLW everyone, can anyone send me notes for material scienece
    April 30, 2019, 05:43:38 PM
  • shahul: Any one can guide me, to join new membership ST (Diploma stream) by online???
    April 30, 2019, 04:30:47 PM
  • shahul: Good evening
    April 30, 2019, 04:29:18 PM
  • vae: Hi
    April 29, 2019, 12:42:11 PM
  • imna: i am looking for coaching class in Bangalore. Please I need guidance
    April 28, 2019, 09:42:40 AM
  • imna: hello anyone from bangalore?
    April 28, 2019, 09:37:41 AM
  • T-1700565: Please send AN 205 and AN 210 NOTES
    April 25, 2019, 10:06:09 PM
  • vae: Good Afternoon Everyone
    April 25, 2019, 10:36:29 AM
  • vae: Happy Easter Every1
    April 21, 2019, 12:53:46 PM
  • RK Electrical: Can anyone send me the fundamentals of design and manufacturing pdf book link?
    April 16, 2019, 10:29:00 PM
  • vae: Happy Vishu...Everyone
    April 15, 2019, 11:30:44 AM
  • vae: hello
    April 14, 2019, 12:45:51 PM
  • SUJEET KUMAR MISHRA: Good afternoon sir, mujhe sec-a, material science ka  notes  chahiye sir
    April 13, 2019, 10:40:49 AM

* Search


* User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Board Stats

  • stats Total Members: 48881
  • stats Total Posts: 27506
  • stats Total Topics: 6655
  • stats Total Categories: 6
  • stats Total Boards: 31
  • stats Most Online: 626

Author Topic: AMIE section A subjects  (Read 19618 times)

Description:
May 05, 2009, 01:58:01 PM
  • Administrator
  • Senior Member
  • *****
  • Posts: 2173
  • Luck is for lazies, success is for who work hard
    • View Profile
    • AMIE Online Coaching
Advertisement
Scheme with Codes : Section A (Non-Diploma) — 2; Section A (Diploma)

SECTION A EXAMINATION

Non-diploma Scheme (Code 2)
AN 201 Fundamentals of Design and Manufacturing
AN 202 Material Science and Engineering
AN 203 Computing and Informatics
AN 204 Society and Environment
AN 205 Mechanical Science
AN 206 Engineering Physics & Chemistry
AN 207 Engineering Drawing and Graphics
AN 208 Electronics & Instrumentation
AN 209 Engineering Mathematics
AN 210 Electrical Science

Diploma Scheme (Code 3)
AD 301 Fundamentals of Design and Manufacturing
AD 302 Material Science and Engineering
AD 303 Computing and Informatics
AD 304 Society and Environment
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »


Praveen
AMIE Study
May 26, 2009, 02:19:54 PM
Reply #1
  • Super Member
  • Registered User
  • *
  • Posts: 9
    • View Profile
thanks praveen....
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 29, 2009, 02:10:43 PM
Reply #2
  • Registered User
  • *
  • Posts: 11
    • View Profile
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
September 16, 2009, 10:01:09 PM
Reply #3
  • Super Member
  • Registered User
  • *
  • Posts: 34
    • View Profile
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
March 17, 2010, 09:01:04 PM
Reply #4
  • Super Member
  • Registered User
  • *
  • Posts: 28
    • View Profile
what  abt section b?????
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
March 17, 2010, 09:03:57 PM
Reply #5
  • Super Member
  • Registered User
  • *
  • Posts: 28
    • View Profile
thnks pravin in advance.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
March 24, 2010, 01:42:04 PM
Reply #6
  • Super Member
  • Registered User
  • *
  • Posts: 59
    • View Profile
Hi All,

Pls go through below link for all section - subject details.

http://www.ieindia.info/courseContent.aspx

Regards
Shailen
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
March 28, 2010, 08:36:47 AM
Reply #7
  • Super Member
  • Registered User
  • *
  • Posts: 42
    • View Profile
Hi,

If you are diploma holder refer following detailed syllabus with recommended books

SOCIETY AND ENVIRONMENT (AD 304)
Group A

Society
Societal Structures and Dynamics
An analysis of basic sociological concepts and their applications to contemporary society; social stratification, caste, class, cultural heritage, occupation, mobility and income distribution. Social tensions and their causes; societal responsibilities and social institutions.

Development Processes
Parameters for development. Interrelationship between social, economic and scientific factors. Role of science and technology in development. Planning—its objectives and assessment,

Technology Assessment
Historical development of science and technology. Criteria for assessment of appropriate technology and technology adaptation.


Group B
Environment Ecosystems
Natural ecosystems. Principles of ecobalance. Biosphere cycle, carbon dioxide cycle. Causes for eco-imbalance—its effects and remedies.

Environmental Degradation
Causes for degradation—its effects. Control of air, water, soil and noise pollutions. Protection of ozone layer.

Waste Management

Agricultural, urban and industrial wastes. Sustainable Development Definition and concept. Technology for sustainable energy and materials.

Recommended Books

DSC Naik and T N Tiwari. Society and Environment. Oxford & IBH Publishing Co. (P) Ltd, New Delhi. D R Sharan, et al. Engineering, Environment & Society. The Institution of Engineers (India), Kolkata.

 --------------------------------------------------------------------------------------------- COMPUTING AND INFORMATICS (AD 303)
Group A

Programming languages.
C including C + + ; Languages—declarations, expressions, control statements, arrays, functions, pointers and structures; Algorithms and flow-charts.Introduction to Pascal.

Informatics.
Information systems for decision making; Data management and database management technology; Office automation system—LAN, WAN, electronic mail, electronic data interchange; client server technology; overview of TCP/IP; Information systems for business; Strategic information systems; Information resources management.:

Group B

Computer basics.
History, generations and classification of computers; Number systems; Boolean algebra.

Hardware.
Introduction to logic gates an flip flops: components of a computer input/output devices, CPU unit and memory unit, secondary storage.

Software. System software; application software; compilers and translators.

Operating systems. Introduction to operating systems; types of operating systems and their functions; popular operating systems—MS-DOS, UNIX and Windows; file management.

Recommended Books
□ DK Basu, et al. Computer Systems and Data Analysis. Narosa Publishing House, New Delhi. □ N Peter. Introduction to Computers. Tata McGraw-Hill Publishing Co. Ltd, New Delhi. □ P B Mahapatra. Thinking in C including Object Oriented Programming with C+ + . S. Chand & Co. Ltd, New Delhi. ---------------------------------------------------------------------------------------------


MATERIAL SCIENCE AND ENGINEERING (AD 302)
Group A
Introduction to materials:
Metal and alloys, ceramics, polymers and semiconducting materials—introduction and application as engineering materials.

Defects in solids:
Point, line and surface defects. Diffusion in solids.

Phase diagrams: Monocomponent and binary systems, non-equilibrium system, phase diagram and application in crystalline and non-crystalline solids.

Mechanical properties: Tensile strength, yield strength, elastic and viscoelastic properties, creep, stress relaxation and impact. Fracture behaviour. Ductile fracture, Griffith theory, effect of heat treatment and temperature on properties of metals.

Deformation of metals: Elastic and plastic deformation, slip, twin, dislocation theory, critical resolved shear stress, deformation in polycrystalline materials, season cracking, Bachinger's effect, strengthing mechanics, work hardening recovery, crystallisation and grain growth, cold and hot working.


Group B


Heat treatment:
Iron-carbon system. Annealing, normalising, hardening, critical cooling rate, hardenability, age hardening, surface hardening, tempering.

Thermal properties: High temperature materials, materials for cryogenic application, thermally insulating materials. (Specific heat, thermal conductivity, thermal expansion).

Ceramic materials and polymers:
Silicon structures, polymerism fraction in glass, electrical properties of ceramic phases, rocks, building stones, refractories.

Polymerisation mechanism:
structural properties of polymer, thermoplastics, thermosets, elastomer, resins, composites, particle and fibre reinforced composite. Composite material including nano material.

Electronic properties:
Magnetism, dimagnetism, paramagnetism, ferromagnetism, magnetic energy, zone theory of solids, zones in conductors and insulators.

Recommended Books □ L A Vanblack. Elements of Material Science and Engineering. Addison-Wesley (Indian edition). □ V Raghavan. Material Science and Engineering. Prentice-Hall of India (P) Ltd, New Delhi.

--------------------------------------------------------------


FUNDAMENTALS OF DESIGN AND MANUFACTURING (AD 301)
Group A

Engineering design process and its structure.
Identification and analysis of need, product design specifications, standards of performance and constraints. Searching for design concepts; morphological analysis, brainstorming. Evaluation of design concepts for physical reliability, economic feasibility and utility.

Detailed design; design for manufacture, assembly, shipping, maintenance, use, and recyclability. Design checks for clarity, simplicity, modularity and safety. Standardization and size ranges. Reliability and robust design.

Design organisation and communication, technical reports, drawings, presentations and models. Concept of manufacturing; classification of manufacturing processes. Fundamentals of casting. Basic understanding of commonly used casting processes (sand casting, investment casting and permanent mould casting processes).

Fundamentals of metal forming; hot and cold working; basic understanding of primary metal forming processes (rolling, forging, extrusion and drawing processes, punching and blanking).


Group B


Fundamentals of metal cutting; tool-work interaction for production of machined surfaces. Classification of machining processes. Basic machining operations (turning, shaping, planning, drilling and milling processes).

Fundamentals of grinding and finishing; overview of unconventional machining processes; fundamentals of welding processes; introduction to primary welding and allied processes; selection of manufacturing processes.

Design for manufacturability. Need for integration—commercial, economic and technological perspective; basic tools of integration; concept of a system. Introduction to information technology and its elements.

Introduction to group technology; introduction to simulation and database management systems.

Elements of integration—controllers, sensors, robots, automated machines; AGVs, AS, RS, etc. Product and process design for integration; design for economic manufacturing; design for manufacturing integration.

Introduction to computer aided process planning; selection of machine tools.

Recommended Book

□ GK Lai, Vijay Gupta and N Venkat Reddy. Fundamentals of Design and Manufacturing. Narosa Publishing House, New Delhi.

Reference Books □ G Dieter. Engineering Design. McGraw-Hill International. □ G K Lai and S K Choudhary. Fundamentals of Manufacturing Processes. Narosa Publishing House, New Delhi.


□ S K Vajpayee. Principles of Computer Integrated Manufacturing. Prentice-Hall of India (P) Ltd., New Delhi.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
Som
AMIE-ST
April 05, 2010, 12:44:57 PM
Reply #8
  • Registered User
  • *
  • Posts: 1
    • View Profile
Dear Sir.
 
My Roll No is - ST455720-5 (year 2005).
 
 
I have given section A exams in year 2006 summer & scored C grade in three subjects. Please see attached image file
 
After that I have given ( Computer & Informatics ) exam in year 2007 summer and scored D grade.Please see attached image file.
 
 
 
Now Can you please confirm that is I am eligible to appear for Section B exam directly or I have to give ( Computing & Informatics  subject) exam again to score C grade minimum?
 
 
 
 
In the AMIE Rules Booklet , I have checked that In section A exam , If we got C grade in three subjects & D grade in one subject. then there is some exemption to proceed for Section B exam.
 
Please inform me by email or tel econ . I want to sit for section B exam by this summer only.
 
 
Waiting for a prompt response from your side.
 
 
Thanks a lot in advance.
 
 
Best Regards
 
Sumit Bisht
09582224810
Development Cell
Radiant Polymers Pvt. Ltd.
A-4/7-8, Site IV, Sahibabad Industrial Area,
District Ghaziabad, U.P.- 201010, India
Tel: +91-120-4537200
www.radiantindustries.in


Quote from: "praveen"
Scheme with Codes : Section A (Non-Diploma) — 2; Section A (Diploma)

SECTION A EXAMINATION

Non-diploma Scheme (Code 2)
AN 201 Fundamentals of Design and Manufacturing
AN 202 Material Science and Engineering
AN 203 Computing and Informatics
AN 204 Society and Environment
AN 205 Mechanical Science
AN 206 Engineering Physics & Chemistry
AN 207 Engineering Drawing and Graphics
AN 208 Electronics & Instrumentation
AN 209 Engineering Mathematics
AN 210 Electrical Science

Diploma Scheme (Code 3)
AD 301 Fundamentals of Design and Manufacturing
AD 302 Material Science and Engineering
AD 303 Computing and Informatics
AD 304 Society and Environment
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
April 06, 2010, 11:17:19 AM
Reply #9
  • Registered User
  • *
  • Posts: 10
    • View Profile
In my knowledge, the rule you told is correct but it is applicable for last chance i.e., section A can be complete in 6 years. For the last semester IEI can consider. After completion of Section A IEI will send section B registration form and in the result they give status pass. If these two things are happened for you, then you will eligible for section B and this summer you can apply for Section B subjects. Another thing, after completion of section A IEI give Grade Point Average in your grade card and also gives status pass in grade card. See your grade card. all the best
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
April 25, 2010, 12:44:34 PM
Reply #10
  • Super Member
  • Registered User
  • *
  • Posts: 54
    • View Profile
thnx for the list  8-)
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
 

Related Topics

  Subject / Started by Replies Last post
9 Replies
1478 Views
Last post September 18, 2010, 02:18:21 PM
by Shaileshbhai B Patel
0 Replies
765 Views
Last post December 22, 2010, 12:06:13 PM
by br.nanda
0 Replies
936 Views
Last post August 02, 2011, 10:19:40 AM
by pritesh_822005
3 Replies
705 Views
Last post January 23, 2012, 08:41:30 PM
by allmyposts
1 Replies
788 Views
Last post March 01, 2012, 02:04:41 PM
by bhupsds
5 Replies
3177 Views
Last post December 25, 2012, 07:03:18 PM
by umeshkrs3008
1 Replies
1250 Views
Last post August 11, 2013, 03:04:58 PM
by kavithahn

* Search

* Subscribe to Forum

Enter your email address:

Advertisement

* Recent Posts

Re: All About AMIE by vae
[May 09, 2019, 04:40:15 PM]


Re: All About AMIE by vae
[May 09, 2019, 04:26:26 PM]


Re: All About AMIE by vae
[May 09, 2019, 01:12:24 PM]


Re: All About AMIE by vae
[May 09, 2019, 01:03:32 PM]


Re: All About AMIE by vae
[May 08, 2019, 04:59:27 PM]