Welcome to AMIE Study - AMIE India Students Forum

AMIE Study - AMIE India Students Forum

collapse collapse

* Shoutbox

Refresh History
  • devjangde: Dear Sir/Madam please me out for my membership Number and  reference number.  I lost both of this . Is there any way to find out?
    October 08, 2018, 09:32:50 AM
  • devjangde: Dear Sir/Madam,
    October 08, 2018, 09:30:46 AM
  • Srijib: Can someone have any notes for the subject society and environment
    October 07, 2018, 07:37:52 PM
  • muleredd: can someone have previous year question papers for Sec B Mining Engineering ?
    October 07, 2018, 01:52:05 PM
  • Pahadi57: Will I send the printed copy of the winter application form after online form filling successfully.... Pls advice
    October 05, 2018, 05:54:03 PM
  • SANUKARMAKAR1: Section A society and environment and computing and informatics not required .
    October 04, 2018, 03:19:43 PM
  • pravendrapmmb: Where to get books for section B Electrical Engineering
    October 02, 2018, 10:23:23 PM
  • rodricksarthur: Sum 2018 results, Mining Engineering Sec B, MN435 result is not declared. Any one of you, know why?
    September 28, 2018, 08:59:53 AM
  • divakara.sd: Dear sir/Madam I am Divakar, Study under IEI in M and M branch. Recently I am registered for section B I quired the study notes and Questions papares for fallowing subject.  IC402- ENGINEERING MANAGEMENT MM403- METALLURGICAL THERMODYANAMIC AND KENETICS MM404-EXTRACTIVE METALLURGY MM405-MECHANICAL BEHAVIOUR OF MATERIALS MM406-PHYSICAL METALLURGY MM407-METALLURGICAL DESIGN MM432-WELDING AND ALLIED PROCESS MM433-ADVANCED PHYSICAL METALLURGY MM434-FOUNDRY ENGINEERING   Thanks and regards Mr.Divakar State-Karnataka District-Bellary Place-Emmiganure Pin code-538113 Phone number-9743956204
    September 24, 2018, 11:48:09 PM
  • Anu Mangalore: Section b mechanical notes required
    September 21, 2018, 09:37:37 PM
  • AjeetIOCL: can u tell me ,my AMIE registration is of 2010 which has expired in 2016 ,I have Re-registered again in 2018 by re-registration process .is my date of election will be changed or remain same.is this degree of AMIE will be Valid? because Supreme Court has decided not to consider AMIE degree after May 2013
    September 20, 2018, 08:59:06 PM
  • jooly: is data structure in CS is tough?do we need to learn C program thouroughly for it?
    September 11, 2018, 09:33:03 AM
  • Manish100ni: I got AAAD grade in section A , i am pass or fail ??
    August 19, 2018, 05:02:34 AM
  • [email protected]: Can anyone tell if Saudi Engineers Council accept  AMiE or not?
    July 18, 2018, 11:38:24 AM
  • Khadeejath Shamna: Can we send section b registration form and examination form together?  When can we register for section b winter exam 2018?
    July 09, 2018, 03:46:15 PM
  • GCPATIL: How to change mobile number and email address
    July 09, 2018, 01:33:10 AM
  • Sanoj.kaushik: Hi everyone, It is informed that civil lab experiments at Manav Rachna Institute would be started in mid july. So, kindly informed to other friends.
    June 15, 2018, 05:33:15 PM
  • ramajit: yes. i also need help for project work. any format or ref available. pls send me email [email protected]
    June 12, 2018, 10:22:21 AM
  • JYOTI VERMA: mail me on [email protected]
    June 10, 2018, 09:33:12 PM
  • JYOTI VERMA: i wqnt to know about mechanical project work topiics.please send me it on my mail if any one have
    June 10, 2018, 09:32:34 PM

* Search


* User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Board Stats

  • stats Total Members: 48702
  • stats Total Posts: 27337
  • stats Total Topics: 6606
  • stats Total Categories: 6
  • stats Total Boards: 31
  • stats Most Online: 626

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - taarkshya

Pages: [1]
1
AMIE Study Tips / Material Science and Engineering - Info needed about books
« on: September 18, 2010, 07:38:12 AM »
Hi All,

How good is the book

1. "Materials science and Engineering" L.H. VanVlack, Pearson Education, This is the textbook prescribed for IEI. Is it worth reading from the book?

2. "Materials Science and Engineering" by Callister, WIley inc.
3. "Materials Science and Engineering" by IP Singh and Subhash Chander, Jain Brother


Which of the above three is best? Which one covers the syllabus completely. Given that i have 2.5 months from now (till winter 2010 exams), can i complete the materials science and engineering syllabus, studying 2 hours a day?



Thanks
Taarkshya

2
Hi All,

After going through several posts in this forum and through the IEI website, it still is not clear on what is meant by either Re-registration or Extension.

The scenario is this

Lets say i have finished my 6 Year period for Section-A but failed to clear all my exams by the end of that perdio, in that case would i be eligible for -

1. Registration for Sec-A exams, all over again, previous exams forfeited?

2. or Am i eligible for a 2 year extension?


The strange thing is that IEI website doesn't talk about this, it says "CANDIDATES IN TRANSITORY BLOCK SWITCHED OVER FROM OLD TO NEW SCHEME". In my case, this doesn't apply. As i joined AMIE in 2007 as a technician, so i don't belong to the transitory block (By the way my Sec-A expiry period is in 2013). As i am already following the revised scheme of Sec-A, would i be eligible for 2 Year extension, if YES, then where are the Forms, or would IEI send the forms (for 2 year extension) automatically to me just in the last year or so? Also kindly let me know where i can download the forms and where this 2 Year extension for "GENERAL CANDIDATES IN THE NEW SCHEME" is mentioned in the IEI website.



Thanks
Taarkshya

3
Hi All,

For the Engineering Drawing exam, are we supposed to carry the mini-drafter, drawing board and drawing paper to the examination hall or would i be provided something at the examination centre itself?

If we are not provided with any thing, are we supposed to draw / draft the diagrams on the examination paper itself (which has ruled lines in it) ?

Also kindly provide some tips for studying this Engineering Drawing subject.



Thanks
Tarkshya

4
Hi All,

Could anyone tell me how much time would be needed to study for Design and manufacturing, to complete the syllabus, along with studying material science and engineering. Daily i can spare 1 hour for both and During sundays and saturdays, i can spend 12 hours. Is it possible to complete the syllabus of these two subjects, as i have to appear for these two subjects in summer 2010 exam.



Thanks
Taarkshya

5
Hi All,

Could any one tell me the name of subjects that can be finished in 5 months, given the fact that i can spare just 2 hours everyday for its study. Can material science and engineering be done in this fashion? What about Engineering Drawing. Also let me know any other subjects that can be done in this fashion, i am currently doing Sec-A (Non-Diploma), also i am working full time, so all i can spend is two hours everyday during weekdays and 5 hours on sundays and saturdays each.




Thanks
Taarkshya

6
Hi All,

Can anyone of you who have had experience in appearing for Engineering Mathematics Exam, guide me in preparing for it? I am still quite confused as this is for the first time i am appearing for any of the AMIE exams. I have applied to attempt three subjects viz. Computing and informatics, Society and Environment and Engineering Mathematics.

After reviewing (and after submitting my exam form) i found the syllabus of Engineering Mathematics to be too overwhelming so as to be completed within a period of 3 months. (3 months from Feb - now only 2 left).

I just want to know whether it's still possible for me to finish the syllabus of Mathematics, given the fact that i am doing a full time job and i can spare just 2 hours everyday for maths (because of my job schedule) and during sunday's & saturday's i can spare at most 6 hours each day, and only 2 more months are left ?

Can anyone advice me on this on whether is it possible to cover the syllabus or not? or shall i postpone Maths for Winter-2009 exams? Uptil now i have covered only the basics of mathematics like functions and graphs, continuity etc.


Thanks

7
Hi,


Can anyone post the old/previous question papers for Mathematics, Section-A (Non-Diploma)



Thanks

8
Hi All,


What's the minimum time required to prepare for the exam "Society and Environment", ? can it be done in 2-3 months? Which book do you suggest? I have a book titled "Society and Environment" by Mukhi, (Satya Prakashan, Delhi), is it a good one?


Thanks

9
General Topics and Discussions / Appearing from alternate Exam Centre
« on: February 24, 2009, 07:54:36 PM »
Hi,

1. When i registered for AMIE Sec -A (non diploma stream) as a Technician member, i did it from delhi. Also the address in my I-Card is my delhi home address. Currently i am in bangalore, would it possible for me to appear for summer-2009 examinations from Bangalore???


2. There is an option for specifying the examination centre code in the Examination form, if i specify the code for bangalore (code 560), would my form be accepted by the institution of engineers?, would i be allowed to give my exams from bangalore (even though the address in my I-Card is a delhi address)?

OR

Am i supposed to send them an address proof along with an application, enclosed with the examination form, requesting them to allow me to appear from bangalore centre?

Please respond.


Thanks

Pages: [1]

* Search

* Subscribe to Forum

Enter your email address:

Advertisement

* Recent Posts

Re: making whatsapp group by ganesan5450
[October 12, 2018, 02:40:35 PM]


Re: making whatsapp group by AJEEBHAMSA
[October 11, 2018, 12:58:09 PM]


Re: making whatsapp group by aditya_bhushan
[October 10, 2018, 07:18:40 PM]


Re: Mining Engineering by muleredd
[October 07, 2018, 02:16:55 PM]


Solid Wood Dining Table Set by bellianawil
[October 06, 2018, 05:18:26 PM]