Welcome to AMIE Study - AMIE India Students Forum

AMIE Study - AMIE India Students Forum

collapse collapse

* Shoutbox

Refresh History
  • sulemangani: Can I reresisyered for section B exam as I have passed section A in winter 2008 but not appeared in some exams upto winter 2014
    December 12, 2018, 06:59:49 PM
  • I P Sarath Menon: Rcc , steel, advance structural analysis, design and analysis, soil, water hand written notes which was used to successfully complete AMIE [email protected]/9387774349
    November 28, 2018, 09:37:56 AM
  • I P Sarath Menon: Civil Engineering notes with optional structural with me
    November 28, 2018, 09:33:52 AM
  • ST694011-6: Hi everyone how to get RCC notes
    November 28, 2018, 09:17:25 AM
  • rekha1996: dbms
    November 27, 2018, 05:58:47 PM
  • rekha1996: Dbms
    November 27, 2018, 04:52:21 PM
  • Anwar VYM: Is AMIE degree acceptable in UAE?
    October 23, 2018, 10:16:46 PM
  • devjangde: Dear Sir/Madam please me out for my membership Number and  reference number.  I lost both of this . Is there any way to find out?
    October 08, 2018, 09:32:50 AM
  • devjangde: Dear Sir/Madam,
    October 08, 2018, 09:30:46 AM
  • Srijib: Can someone have any notes for the subject society and environment
    October 07, 2018, 07:37:52 PM
  • muleredd: can someone have previous year question papers for Sec B Mining Engineering ?
    October 07, 2018, 01:52:05 PM
  • Pahadi57: Will I send the printed copy of the winter application form after online form filling successfully.... Pls advice
    October 05, 2018, 05:54:03 PM
  • SANUKARMAKAR1: Section A society and environment and computing and informatics not required .
    October 04, 2018, 03:19:43 PM
  • pravendrapmmb: Where to get books for section B Electrical Engineering
    October 02, 2018, 10:23:23 PM
  • rodricksarthur: Sum 2018 results, Mining Engineering Sec B, MN435 result is not declared. Any one of you, know why?
    September 28, 2018, 08:59:53 AM
  • divakara.sd: Dear sir/Madam I am Divakar, Study under IEI in M and M branch. Recently I am registered for section B I quired the study notes and Questions papares for fallowing subject.  IC402- ENGINEERING MANAGEMENT MM403- METALLURGICAL THERMODYANAMIC AND KENETICS MM404-EXTRACTIVE METALLURGY MM405-MECHANICAL BEHAVIOUR OF MATERIALS MM406-PHYSICAL METALLURGY MM407-METALLURGICAL DESIGN MM432-WELDING AND ALLIED PROCESS MM433-ADVANCED PHYSICAL METALLURGY MM434-FOUNDRY ENGINEERING   Thanks and regards Mr.Divakar State-Karnataka District-Bellary Place-Emmiganure Pin code-538113 Phone number-9743956204
    September 24, 2018, 11:48:09 PM
  • Anu Mangalore: Section b mechanical notes required
    September 21, 2018, 09:37:37 PM
  • AjeetIOCL: can u tell me ,my AMIE registration is of 2010 which has expired in 2016 ,I have Re-registered again in 2018 by re-registration process .is my date of election will be changed or remain same.is this degree of AMIE will be Valid? because Supreme Court has decided not to consider AMIE degree after May 2013
    September 20, 2018, 08:59:06 PM
  • jooly: is data structure in CS is tough?do we need to learn C program thouroughly for it?
    September 11, 2018, 09:33:03 AM
  • Manish100ni: I got AAAD grade in section A , i am pass or fail ??
    August 19, 2018, 05:02:34 AM

* Search


* User Info

 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Board Stats

  • stats Total Members: 48767
  • stats Total Posts: 27369
  • stats Total Topics: 6634
  • stats Total Categories: 6
  • stats Total Boards: 31
  • stats Most Online: 626

Author Topic: Project Report one side print or double side print??  (Read 1913 times)

Description:
July 09, 2014, 02:29:57 PM
  • Super Member
  • Senior Member
  • **
  • Posts: 135
    • View Profile
Advertisement
Hi friends,

How to print project report.

Is it one side print or double side print?? Please advise immediately.
I need to submit for summer-2014.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »


July 10, 2014, 08:56:54 AM
Reply #1
  • Registered User
  • *
  • Posts: 25
    • View Profile
Dear friend , it should be one side on white Bond paper and three copies ( one for internal guide, one for external guide and one for self record).

Thanks and best of luck.

Lekhraj Singh
AMIE Electrical Engineering
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 10, 2014, 01:46:33 PM
Reply #2
  • Registered User
  • *
  • Posts: 5
    • View Profile
Hello Lekhraj,

Can you tell us how big the report should be?? in terms of number of pages!!! Is it to be lengthy or ??? Pl reply.

Thanks and Regards,

Vijay.A
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 11, 2014, 09:04:47 AM
Reply #3
  • Registered User
  • *
  • Posts: 25
    • View Profile
Quote from: "vrag2006"
Hello Lekhraj,

Can you tell us how big the report should be?? in terms of number of pages!!! Is it to be lengthy or ??? Pl reply.

Thanks and Regards,

Vijay.A



Dear Mr. Vijay,
                      The optimum total number of pages in a project  report is between 25 to 35. It should be same format( Headings) as given in instruction booklet received from IEI. Hope, this will help you.

Thanks and best of luck.

Lekhraj Singh
AMIE Electrical Engineering
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 11, 2014, 01:55:50 PM
Reply #4
  • Registered User
  • *
  • Posts: 5
    • View Profile
Dear Mr.Lekhraj Singh,

Thank you so much for the information.

Best Regards,

A.Vijaya Ragavendiran.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 14, 2014, 09:55:17 AM
Reply #5
  • Registered User
  • *
  • Posts: 5
    • View Profile
Dear Mr.Lekhraj Singh,

Pl clarify my doubt below.

How many copies are to be submitted to IEI,kolkata ?? 2 0r 1??

if it is 2, does it include the copy which we submit to project guide??

The copy in which we get signature from project guide will be sent to IEI by us or by project guide??

pl find attached a guidelines pdf file where it is mentioned that we need to send one copy to IEI in one place, in the other place it is mentioned to send two copies to IEI. It is little bit confusing, pl clarify.

Thanks and Regards,

A.Vijaya Ragavendiran.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 14, 2014, 12:09:12 PM
Reply #6
  • Super Member
  • Senior Member
  • **
  • Posts: 135
    • View Profile
If you see the project work lab guideline sent by postal
It says one copy need to sent to IEI.
So
it should be one.

Completed friends,

Please confirm...


Quote from: "vrag2006"
Dear Mr.Lekhraj Singh,

Pl clarify my doubt below.

How many copies are to be submitted to IEI,kolkata ?? 2 0r 1??

if it is 2, does it include the copy which we submit to project guide??

The copy in which we get signature from project guide will be sent to IEI by us or by project guide??

pl find attached a guidelines pdf file where it is mentioned that we need to send one copy to IEI in one place, in the other place it is mentioned to send two copies to IEI. It is little bit confusing, pl clarify.

Thanks and Regards,

A.Vijaya Ragavendiran.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
July 14, 2014, 01:28:06 PM
Reply #7
  • Registered User
  • *
  • Posts: 25
    • View Profile
Dear Mr. A.Vijaya Ragavendiran,
                                                Only one copy of the project report duly signed by the project guide need to be sent to IEI Kolkata mentioning on to of the envelope as" Project Report for External Evaluation,  and your branch of engineering" . The internal evaluated copy would be sent by the project guide with evaluation report to IEI but some time project guide handed over the evaluated copy to the student, in such case this copy also send by the student to IEI but on behalf of project guide( from Project Guide name and address) .

Thanks and hope it will clarify your doubt.

Lekhraj Singh
AMIE Electrical Engineering



Quote from: "vrag2006"
Dear Mr.Lekhraj Singh,

Pl clarify my doubt below.

How many copies are to be submitted to IEI,kolkata ?? 2 0r 1??

if it is 2, does it include the copy which we submit to project guide??

The copy in which we get signature from project guide will be sent to IEI by us or by project guide??

pl find attached a guidelines pdf file where it is mentioned that we need to send one copy to IEI in one place, in the other place it is mentioned to send two copies to IEI. It is little bit confusing, pl clarify.

Thanks and Regards,

A.Vijaya Ragavendiran.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
August 19, 2014, 10:55:54 AM
Reply #8
  • Registered User
  • *
  • Posts: 5
    • View Profile
Dear Mr.Lekhraj Singh,

Thank you.

Best Regards,

A.Vijaya Ragavendiran.
« Last Edit: January 01, 1970, 04:00:00 AM by Guest »
 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1217 Views
Last post August 09, 2011, 11:19:09 AM
by ravinder.majra
0 Replies
1980 Views
Last post December 09, 2011, 10:06:17 AM
by Nihil
1 Replies
2922 Views
Last post March 21, 2012, 05:28:35 PM
by adamstuart07
17 Replies
11945 Views
Last post July 17, 2016, 08:06:09 PM
by monikamanu
0 Replies
729 Views
Last post June 13, 2012, 02:40:37 PM
by pankaj2411
4 Replies
2528 Views
Last post March 25, 2015, 10:42:53 AM
by nathulalusa
0 Replies
10408 Views
Last post December 15, 2017, 07:44:41 PM
by nelokulood

* Search

* Subscribe to Forum

Enter your email address:

Advertisement

* Recent Posts

Re: Important!!! AMIE Exam fee revised from Rs 2000 to Rs 3000 by sulemangani
[December 12, 2018, 07:01:18 PM]


DiesqueLW by uncopy
[November 06, 2018, 08:47:00 PM]


Re: Supermembership queries by praveen
[November 04, 2018, 09:39:26 AM]


Supermembership queries by Nitin verma
[November 03, 2018, 10:29:23 AM]


Supermembership query by Nitin verma
[November 02, 2018, 02:55:47 PM]