AMIE INDIA Students Forum

[rock1289]

IC 402-ENGINEERING MANAGEMENT

Group A

Management and Organisations
Management process: Definition, planning organizing, directing, controlling, coordinating,
types of management.
Organisation Definition, planning, design and development, types of organizations.

Management planning and control: Classical, new classical and modern principles.
General Management, scientific management, engineering, management, systems
management.
Planning: Procedures, resources and constraints, objectives, goals, policies and procedures.
Control: Setting of reference or standards, appraisal or evaluation, monitoring and
controlling, types of control.
Human resource planning and management, selection, recruitment, training, retraining, skill
development, competence development, promotion and career development, participative
management, trade unions, and collective bargaining,

Management of Physical Resources
Plant: site selection procedures, factors affecting selection. Layout-types and relative merits
and demerits, Maintenance-Objectives, different types of associated decisions, strategies for
effective maintenance, computer applications.
Material : Functions, objectives, planning and control including inventory models with or
without storage costs, price break ( excluding dynamic and probabilistic considerations).
Different classes of inventory. Material Requirement Planning (MRP).

Group B

Financial management: Introduction to standard forms of financial statements, ie., balancesheet,
profit and loss, and income statement. Fixed and current asset items. Fixed and current
liability items. Linkage of two successive balance-sheets through income or profit and loss
statement. Funds flow statement. Financial ratios and their implications.

Managerial economics: Concepts, theory of production, marginal productivity and cost.
Introduction to theory of firm.

Quality management: Quality definition, quality planning, quality control and quality
management, Total quality management, ISO 9000 systems, simple quality control
techniques like control charts and acceptance sampling.
Marketing management consumer behavior, market research, product design and
development pricing and promotion.

Project management: Introduction. Concept of a project, project management concepts,
project simulation, cost or project and means of financing, economic evaluation criteria of the project,
project implementation, project planning, scheduling and monitoring, project control
(PERT, CPM techniques including crashing). Project evaluation.

Information technology and management. Role of information, management information
system and decision support system, Information technology-introduction to e-business, ecommerce
and integration tools like enterprise resource planning (ERP).

[rock1289]

CV 403-CIVIL ENGINEERING MATERIALS & CONSTRUCTION PRACTICES

Group A

Introduction to civil engineering materials -stone, timber, cement, steel, plastics, concrete.
Engineering properties of materials-density, strength (compressive, tensile, flexural, shear,
etc.), modulus of elasticity, fatigue, limit, creep, shrinkage, relaxation, permeability, fire
resistance. Materials and environment-effect of environment on materials. Classification of
environment-temperature, humidity, rain, fire.

Steel: Manufacture, rolled sections, properties, classifications.

Cement: Manufacture-wet and dry processes, constituents and constitution, propertiessetting,
strength, durability, classification-high early strength, low alkali, rapid hardening.

Concrete: Constituents-coarse and fine aggregates, cement, water. Mineral admixtures-fly
ash, blast furnace, slag, silica fume. Chemical admixtures-air entraining, set retarding and
accelerating, super plasticising. Fresh concrete-workability, air content, segregation.
Hardened concrete-strength, hardness, modulus of elasticity, modulus of rupture. Special
concretes-fibre, reinforced, shortcrete, underwater, high strength. Deterioration and
durability-reinforcement, corrosion, carbonation, alkali aggregate reaction.

Group B

Bricks: Manufacture, classification. Other materials. Standardization and standards-need to
have standards and some common international standards. Relevant Indian standards
(commonly used standards to be listed with brief description). Quality control. Nondestructive
testing and evaluation.

Construction practices: Standards relevant to quality control at site. Safety issues.
Quantities and estimation. Tender document. Contracts-unit rate, lumpsum, turnkey. Project
management-CPM, PERT, bar charts, pie diagrams, escalation, depreciation.

[rock1289]

CV 404-GEOTECHNICAL & FOUNDATION ENGINEERING

Group A

Introduction to soil mechanic, examples of geotechnical engineering applications.
Description of assemblage and individual particles, classification, etc. Soil types.

Geostatic stresses, stresses due to applied loads, stress point, stress paths, principle of
effective stress. Soil-water systems, capillarity, flow through soils. Darcy's law, tests to
determine the coefficient of permeability in the lab and in situ, one-dimensional flow, total
elevation and pressure heads, piping/quicksand condition.

Two-dimensional flow, seepage, continuity condition, methods of solution, confined and
unconfined flows, flow nets, etc. Tests for strength and stress strain relations, stress paths.

One-dimensional compression test, compressibility parameters, maximum past consolidation
pressure, OCR, phenomenon of consolidation, Terzaghi theory, coefficients of consolidation
and secondary compression (creep), consolidation under construction loading, vertical drains,
radial flow consolidation, etc.

Strength and triaxial testing, Mohr-Coulomb strength criterion, drained, consolidated,
undrained and undrained tests, strength of sands loose and dense) and fine grained (NC and
OC) soils, partially saturated soils, volume changes (dilation and contraction) due to shear
stresses.

Group B

Characterization of ground, site investigations, methods of drilling/boring, sampling and in
situ tests SPT, CPT, plate load test and its limitations, groundwater levels, etc.

Bearing capacity of foundations, general, local and punching shear modes, theories,
corrections for different conditions, ultimate and allowable pressures, methods based on in
situ tests.

Settlement of foundations, one- two- and three dimensional approaches, immediate
consolidation and creep settlements, stress path method, methods based on III Situ tests, etc.

Choice of type of foundations, shallow/deep, isolated, combined, strap, trapezoidal or mat
foundations, contact pressure, distribution, basics of footing design. Ground improvement
methods, preloading, vertical drains, vibrocompaction, stone columns, heavy tamping, etc.

Earth pressure theories, Coulomb and Rankine theories, effect of, layering, water level, etc.
Retaining walls, types-gravity, cantilever, counterfort, reinforced. earth, ete. Design methods,
checking for stability.

[rock1289]

CV 406-PRINCIPLES OF GEOINFORMATICS

Group A

Introduction to surveying: Objectives, classification of surveys, Indian topographic series,
map reading.

Linear measurements: Distance measurements with chain and tapes, corrections to
measured length, field survey by chains/tapes.

Compass surveying: True and magnetic bearings, local attraction, fore and back bearing,
various types of compasses and applications, detail plotting, adjustment of compass traverse
using graphical approach.

Levelling: Concepts of Geold, ellipsoid, MSL and level surface, methods of levelling,
determination of height, booking of levelling operation, types of levels, sensitivity. of the
bubble, trigonometric levelling, curvature and refraction effects.

Contouring: Guidelines for preparation of contour m;1ps, methods of contouring.
Plane Tabling (PT): Accessories in PT, methods of PT, re-section method , preparation of
map.

Theodolites: Measurements of horizontal and vertical angles, differences in Vernier and
microplic theodolites, methods of recording angles.

Errors and adjustments: Accuracy and precision, propagation of variance/covariance and
adjustment of errors using observation equation and condition equation approach (matrix
based solution).

Tacheometric surveys: Principle and basic system, subtense bar, various types of
tachometers, plotting with tacheometers.

Curves: Classification, elements of simple circular, compound, reverse, transition, vertical
curves, setting of curves.

Group B

Triangulation: Purpose of triangulation and trilateration, classification, strength of figure,
well conditioned triangle, triangulation figures, reconnaissance and station selection,
intervisibility of stations, signal and towers, base lining, computation and adjustment in
triangulation, satellite station.

EDM: Principles and applications, instruments: Geodimeter, Tellurometer, Distomat, etc.

Digital Theodolites/Total Station/GPS: Principles and applications.

Introduction to photogrammetry: Comparison of serial photographs and topographic maps,
definition of basic terms, perspective of near-vertical photograph, scale and coordinates from
photographs, stereoscopy, parallel bar measurements, determination of heights, principle of
radial line triangulation, assumption, limitations and errors.

Introduction to remote sensing: Remote sensing system, data-acquisition and processing,
EMR and spectrum, atmospheric windows, Interaction mechanisms, multi-concept, sensors
and platforms. Interpolation of aerial photographs and satellite imagery and their interaction.

[rock1289]

CV 407-ANALYSIS AND DESIGN OF STRUCTURES

Group A

Analysis
Stability and determinacy of structures.

Review of shear force and bending moment diagrams in beams and frames.

Plane trusses.: Method of joints and method of sections. Deflection of trusses (virtual work
method). Deflection of beams and frames.

Method of virtual work by Castigliano's theorem;

Moment-area method and conjugate beam method. Influence line diagrams and moving
loads. Three-hinged arches and cables.

Analysis of statically indeterminate structures. Force and stiffness method of analysis.

Plane truss using method of consistent deformation. Beams and frames.

Method of consistent deformation, three-moment equation, slope-deflection equations,
moment distribution method, Kani's method.

Group B

Design

Introduction.

Structural fasteners (rivets, welds, bolts).

Design of tension members.

Design of compression members.

Design of beams (rolled section, build-up sections). Design of bolted (eccentric) connections.

Design of welded plate girder.

Design of industrial buildings (gantry girder, roof trusses etc).

Design of beam-columns and column bases. Design of RCC beams, columns, slabs and
footings by working stress method of design.

[aneesh_adiyottil]

Thank you my friend. you have done a very good job. It will of course help all the students like me


Aneesh