BIOS

BIOS

Postby ammaraobsnl » Wed Oct 27, 2010 6:34 pm

BIOS (Basic Input/Output System)
BIOS is a low level program used by your system to interface to computer devices such as your video card, keyboard, mouse, hard drive, and other devices. What BIOS programs provide in the computer are very simple function calls or small subprograms which can be used by higher level programs to perform simple operations on computer devices. For example a BIOS program would provide the ability to write a character to memory on a video card.


BIOS is normally written in a low level computer language and is permanently or semi-permanently written into the computer system. This type of computer program is commonly referred to as firmware since it was historically written permanently into computer systems. Although BIOS is a program, because of its permanent state, it was not quite considered to be software so the term firmware is used to describe it.

Historically BIOS programs were written into a type of memory called ROM (read only memory). This type of memory would not lose its data when the computer lost power thus ensuring these BIOS programs would always be available. There were different variants of ROM memory some of which could be written multiple times but this memory could not normally be changed or re-programmed once the computer system was sold to the customer. Once ROM memory was written to, it could not be written to again and could only be read when in the possession of the customer. In more recent years a more flexible form of memory was developed called flash ROM which allows ROM memory to be written to after the computer system is in possession of the customer.

Basic Computer Tutorial Contents Page
User avatar
ammaraobsnl
Super Member
Super Member
 
Posts: 26
Joined: Sat Apr 24, 2010 3:31 pm
membership: Senior Technician of The Institution of Engineers (India)- ST

ad
 

Re: BIOS

Postby hemlata » Sat Nov 27, 2010 1:56 pm

bī´ōs) Acronym for basic input/output system, the built-in software that determines what a computer can do without accessing programs from a disk. On PCs, the BIOS contains all the code required to control the keyboard, display screen, disk drives, serial communications, and a number of miscellaneous functions.

The BIOS is typically placed in a ROM chip that comes with the computer (it is often called a ROM BIOS). This ensures that the BIOS will always be available and will not be damaged by disk failures. It also makes it possible for a computer to boot itself. Because RAM is faster than ROM, though, many computer manufacturers design systems so that the BIOS is copied from ROM to RAM each time the computer is booted. This is known as shadowing.

Many modern PCs have a flash BIOS, which means that the BIOS has been recorded on a flash memory chip, which can be updated if necessary.

The PC BIOS is fairly standardized, so all PCs are similar at this level (although there are different BIOS versions). Additional DOS functions are usually added through software modules. This means you can upgrade to a newer version of DOS without changing the BIOS.

PC BIOSes that can handle Plug-and-Play (PnP) devices are known as PnP BIOSes, or PnP-aware BIOSes. These BIOSes are always implemented with flash memory rather than ROM.
User avatar
hemlata
Super Member
Super Member
 
Posts: 29
Joined: Fri Nov 26, 2010 1:20 pm
membership: Technician of The Institution of Engineers (India)- T


Return to For all guest

Who is online

Users browsing this forum: No registered users and 0 guests